Planner
BESTÅ storage planner
BESTÅ
TV bench with drawer runner, push-open Selsviken,
high-gloss/white, 120x42x48 cm | 47 1/4x16 1/2x18 7/8 "
RD$15,595
RD$13,495
-13%
093.992.03
5% discount with IKEA Family
5% discount with IKEA Family
All you need to keep the area around the TV organized. You get lots of storage space and relief from unruly cords. Choose a ready-made combination or create your own. This is just one of many, many possibilities.
Article no
093.992.03
Key features
The two drawers make it easy to keep remote controls, game controls and other TV accessories organized.
It’s easy to keep the cords from your TV and other devices out of sight but close at hand, as there are several cord outlets at the back of the TV bench.
The cable outlet at the top lets cords run down smoothly into the TV bench.
The legs raise your BESTÅ combination from the floor, giving it a light airy look and making it easy to clean the floor underneath.
The drawer has an integrated push-opener, so you don’t need handles or knobs and it will open with just a light push.
The drawer runners are adjustable so you can adjust the front both horizontally and in depth.
Designer
IKEA of Sweden/Carl Öjerstam
Good to know
The TV bench must be secured to the wall with the included wall anchor.
We recommend a TV bench to be a bit wider than the TV placed on it. This TV bench suits a TV up to 45 inches. You can choose a larger TV if it’s not heavier than the specified max load for the bench’s top.
The top panel of the TV bench is intended for a TV with a maximum weight of 110 lbs.
The push-open function requires a space between the frame and the drawer front to allow the drawer to be pushed to open. The small gap is necessary to allow this function and is not a product deviation.
If you want to create a uniform look throughout your home, you can combine SELSVIKEN front with the matching FARDAL door for PAX.
Two drawers with rails included.
Measurements
Assembled size
| Width: | 47 1/4 " |
| Depth: | 16 1/2 " |
| Height: | 18 7/8 " |
| Max load/shelf: | 44 lb |
| Maximum load/drawer: | 22 lb |
| Drawer width (inside): | 20 1/8 " |
| Drawer depth (inside): | 12 3/4 " |
| Max. load on top panel: | 110 lb |
Package size & weight
Do you take it home? Make sure it fits in your vehicle.
Total packages: 12
Materials
Back panel:
Fiberboard, Paper foil, Plastic foil
Panel/ Top:
Particleboard, Honeycomb structure paper filling (100% recycled), Fiberboard, Paper foil, Paper foil, Plastic edging, Plastic edging, Paper foil
Panel:
Particleboard, Honeycomb structure paper filling (100% recycled), Fiberboard, Paper foil, Plastic edging, Plastic edging, Paper foil
Particleboard, Paper foil, Paper foil
Drawer back/ Drawer side:
Particleboard, Plastic foil
Drawer bottom:
Particleboard, Plastic foil, Paper foil
Galvanized steel
Particleboard, Plastic foil, Plastic edging
Aluminum, Epoxy/polyester powder coating
Steel, Powder coating
Care instructions
Wipe clean with a damp cloth.
Wipe dry with a clean cloth.
Check regularly that all assembly fastenings are properly tightened and retighten when necessary.
Included products
2x shelf,
22 "x14 1/8 "
BESTÅ
2x drawer front,
23 5/8 "x10 1/4 "
SELSVIKEN
2x leg,
3 7/8 "x3 7/8 "x3 7/8 "
NANNARP
2x drawer runner, push-open,
14 1/8 "
BESTÅ
1x support leg,
3 7/8 "
BESTÅ
2x drawer frame,
23 5/8 "x15 3/4 "x5 7/8 "
BESTÅ
1x TV unit,
47 1/4 "x15 3/4 "x15 "
BESTÅ
Review the items that make up this item. The price corresponds to the items of the composition displayed.
Environment
TV unit
By using fiberboard with a particle board frame and honeycomb paper as filling material in this product, we use less wood per product. That way, we take better care of resources.
TV unit
We want to have a positive impact on the planet. That is why by 2030, we want all materials in our products to be recycled or renewable, and sourced in responsible ways.
Shelf/drawer frame/drawer front
We want to have a positive impact on the planet. That is why by 2030, we want all materials in our products to be recycled or renewable, and sourced in responsible ways.
Shelf/drawer frame/drawer front
By using sawmill leftovers and scrap wood in the particle board in this product, we make use of whole trees and not only the trunks. That way, we take better care of resources.
Leg
We want to have a positive impact on the planet. That is why by 2030, we want all materials in our products to be recycled or renewable, and sourced in responsible ways.
Assembly instructions
Only the latest versions of these documents are available for download. This means that there may sometimes be differences between the documents you download and the versions that come with the product.
